Cool and fizzy gin cocktail with freshly diced strawberries, pink fruits and juicy lime and lemon garnish! Just Breathe the gin wave and surf the strawberry taste!
INSTRUCTIONS:
The 120ml Mad Shake Bottle contains 30ml of concentrated perfume, which is enough to produce 120ml e-liquid.
1.Add the base of your choice. (VG, PG)
Suggested analogy is 70% VG / 30% PG
For 3mg nicotine you need: 20ml of nicotine base and 70 ml of zero
For 6mg nicotine you need: 40ml of nicotine base and 50ml of zero
For 9mg nicotine you need: 55ml of nicotine base and 35ml of zero
For 12mg nicotine you need: 75ml of nicotine base and 15ml of zero
For 15mgnicotine you need: 90ml of nicotine base
2.Shake well and let the contents mature.
Suggested steeping period 5 to 15 days.
*The above examples are calculated on a base of Mad Juice with 20mg / ml nicotine
** If you need more than 1 nicotine bottle it is recommended to shake well before adding the next
*** The original 30ml perfume contained is considered 100% PG from the manufacturer
**** This bottle is Chubby Gorilla 120ml and contains enough perfume (30ml) to make 120ml of e-liquid.
CAUTION: This product is not intended for immediate use. It is a concentrated fragrance and needs further treatment and dissolution.
Check the Smok ACRO Pod System, which with the ultra-light and portable design, comfortable to hold in your palm of your hand and portable, the Smok Pod Kit integrates a 1000mAh battery and with a USB Type-C fast charging port to shorten the charging time and fulfill your daily vaping needs.
The max output power for the ACRO Kit up to 25W, you can press the Up and Down button to adjust the output power between 5W to 25W freely.
There are two firing mechanism methods available, auto-draw and button-activated, easy to operate and use.
The Smok Pod Device adopts one 0.69 inch OLED screen, which will show you the vaping data clearly.
There is one airflow adjustable switch in the middle section, which allows you to adjust intake volume and immerse in every inhalation, there are 2PCS ACRO Pods included, with 2ml e-juice capacity and built-in 0.8ohm Mesh Coil, which will bring you the excellent flavor and dense vapor.
SMOK RPM 2S 80W Pod System, featuring a single 18650 battery, 1-80W output, and offers a remaining puff system to estimate remaining battery life.
Constructed from durable zinc-alloy, the RPM2S Pod System allots a single high amp 18650 battery to deliver up to 80W of output.
Offering compatibility with both the RPM and RPM 2 Coil Series through specialized pods, the RPM 2S works fluidly with the mesh coils available to deliver delicious vapor that will rival and outpace any other pod system.
Displaying information on a 1.14" OLED Screen, the SMOK RPM 2S features a puff estimate system, at a 60W output on 0.2ohm resistance to give an approximate on remaining puffs available.
Jackaroo Pod Kit features ergonomic design for comfortable grip.
With a built-in 2000mAh battery, you can charge up quickly via the waterproof Type-C charging port.
The battery capacity is actually up to 2200mAh.
Jackaroo Pod Mod Kit supplies leak-proof mechanism with top filling design, it brings more convenience and no condensate.
Jackaroo Pod adopts an upgraded Vandy Vape chip, the power can up to 70W.
The mod also supports more options of VVC mesh coils in different resistance (0.15/0.3/0.6/0.9/1.2 ohm) to provide wider flavor choices and better taste performance.
Vandy Vape Jackaroo Pod Kit can meet all your DL/MTL vaping needs.
Swag PX80 Kit is a max 80W pod mod kit having a compact yet ergonomic body.
It is powered by single 18650 battery with 5-80W wattage range.
A 0.96 inch embedded IML screen is designed for you to get the vaping information.
In order to provide greater vaping experience, Swag PX80 pod comes with quad leakage protection including triple-silicon structure, e-liquid self-circulating system.
What's more, it features adjustable rotating airflow system to offer accurate airflow you desire.
Swag PX80 Kit has 4ml e-juice capacity and is compatible with GTX Coils that will bring ultra-smooth flavor for you.
The exotic blend inspired by a GURU in the genre, combined with the handmade peanut butter, whiskey liqueur, vanilla bourbon and the addition of raisins in an excellent balance, are what deservedly gave the name of GURU-BACCO. Finally, a favorite fruity and soft aftertaste will addict you to the magical taste of the formula!
INSTRUCTIONS:
The 120ml Mad Shake Bottle contains 30ml of concentrated perfume, which is enough to produce 120ml e-liquid.
1.Add the base of your choice. (VG, PG)
Suggested analogy is 70% VG / 30% PG
*On the packaging you will find a table of proportions
For 3mg nicotine you need: 15 ml of nicotine base and 65 ml of zero
For 6mg nicotine you need: 30ml of nicotine base and 50ml of zero
For 9mg nicotine you need: 45ml of nicotine base and 35ml of zero
For 12mg nicotine you need: 60ml of nicotine base and 20ml of zero
For 16mgnicotine you need: 80ml of nicotine base
2.Do not fill the bottle up to the top.
3.Shake well and let the contents mature.
Suggested steeping period 5 to 15 days.
*The above examples are calculated on a base of Mad Juice with 20mg / ml nicotine
** If you need more than 1 nicotine bottle it is recommended to shake well before adding the next
*** The original 30ml perfume contained is considered 100% PG from the manufacturer
**** This bottle is Chubby Gorilla 120ml and contains enough perfume (30ml) to make 100ml of e-liquid.
***** The box contains 1 Chubby Gorilla 120ml bottle with 30ml concentrated aroma and a second bottle with 65ml vegatable glycerine Mad Juice.
CAUTION: This product is not intended for immediate use. It is a concentrated fragrance and needs further treatment and dissolution.
The delicious journey begins with a sweet coffee, accompanied by crisp cinnamon cookies.
The creamy taste of Irish Baileys combined with delicious caramel, hazelnut cream and a dark, velvety bourbon vanilla with roasted almond notes will give you a deeper dive into the tasting experience.
The product cannot be used directly, it needs dilution with bases intended for e-liquid production (sold separately).
Click here to:
Click here to:
Click here to:
For 3mg add 1 x 10ml Nicotine Booster and 1 x 5ml Nicotine Booster, then fill up with VG. For 6mg add 3 x 10ml Nicotine Boosters and fill up with VG.
Add Nicotine Booster (optional), fill up the bottle with VG, and shake well.
For maximum steaming experience, steeping is recommended for a few days.
The SMOK RPM160 Dual-18650 Pod Kit is a real power beast to the vapers.
The SMOK RPM160 works with dual 18650 batteries, fires to an maximum adjustable output of 160W.
The SMOK RPM160 comes with 0.15ohm Mesh coil. The SMOK RPM160 Cartridge has huge capacity of 7.5ml, bringing amazing vaping experience.
The 0.96-inch color display will show vape data clearly too. With top refill system, the SMOK RPM160 Kit can be easily filled without taking the pod out.
Check the Smok Morph 2 Kits, with the zinc alloy structure to improve the durability and the leather element for comfortable tactility.
Equipped with the IQ-S chipset allows outstanding performance and the 0.001S instantly firing speed. powered by dual 18650 batteries and max output up to 230W, with the USB type-c charging port and the max 2A balance charging system to shortens the charging time, the Morph 2 Mod supports the Power Mode and TC Mode.
Under the power mode the rate up to 230w so that you can tentatively adapt the thickness of the vapor and strength of the flavor from the unappealing 1W to 230W.
Under the TC mode, the Smok Box Mod supports 3 coil materials, Titanium, Nickel and Stainless Steel, allowing you to adjust the proper wattage and resistance to result in a pleasant taste.
With the adaptive power function, while vaping, the real-time wattage will automatically fit for the current battery life with a proper level to lengthen the endurance and maintain a stable output.
The 0.96 inch OLED screen will show you the vaping data clearly, such as working mode, battery life, resistance, wattage, puff counting and vaping time.
The Morph 2 comes with the latest TFV18 Tank, which can hold 7.5ml e-juice, with the 3 large airflow adjustable slots on the base allows the loose DL or tight MTL vaping, the TFV18 arranges 5 braces on the base to efficiently transfer the power to the coil for circular and fast heating.
There are 2 types of mesh coils included, which will bring you massive clouds and intense flavor.
The RBA core sold separately, which will bring you the DIY fun.
The SMOK Nord 4 80W Pod Kit has 80W max output by the large 2000mAh inbuilt battery that can easily handle all of your vaping needs, allowing you to immerse in massive clouds and satisfying taste.
The SMOK Nord 4 kit comes with two 4.5ml nord 4 pods, one with an RPM 2 mesh coil and the other with an RPM mesh coil.
Besides, two air-inlet rings are cleverly designed on the top of the device for free adjustment of air intake.
Moreover, the SMOK Nord 4 Pod Kit adopts USB Type-C, which can provide reliable power and faster transfer speed to achieve smooth charging.
1.4A fast charging brings continuous power for your efficient vaping life.
Parameters
Size: 33.7 x 24.4 x 104.9mm
Resistance Range: 0.15ohm-2.5ohm
Output Voltage: 0.5V-4.0V
Charging voltage: 5V±0.2V
Output Wattage: 5W-80W
Charging Current: 1.1A(Max)
Battery Capacity: 2000mAh
Overcharge voltage: 4.3V±0.05V
Standby Current: < 50uA
Over discharge voltage: 2.4V±0.05V
lnput voltage: 3.3V-4.2V
Overcharge Current: 2A±0.6A
It comes with
1 x nord 4 Device (2000mAh)
1 x nord 4 RPM 2 Pod (RPM 2 Mesh 0.16ohm Coil Pre-installed)(4.5ml)
1 x nord 4 RPM Pod (RPM Mesh 0.4ohm Coil Pre-installed)(4.5ml)
As the latest pen-style vape from SMOK Vape Pen series, the SMOK Vape Pen V2 Starter Kit is a portable all-in-one pen-style starter kit with ergonomic design.
The Vape Pen V2 comes with Ceramic new Vape Pen Meshed 0.15ohm coil for optimal flavor and massive clouds.
Together with the direct output of max 60W, the SMOK Vape Pen V2 will bring you stable and amazing vaping with multiple protections.
And it also adopts a simple fire button, making the operation much easier. Just get the compact and portable SMOK Vape Pen V2 for great vaping. The bottom air slots on both size bring a balanced AFC to the coils.
The 3-color LED indicator shows battery life clearly too.
The VOOPOO DRAG X 18650 Mod is equipped with new Generation GENE.TT Chip that provides accurate 5-80W power adjustment mode and 0.001s extreme ignition.
The VOOPOO DRAG X kit can provides 80W max output power by single 18650 battery.
The VOOPOO DRAG X tank comes with 4.5ml large juice capacity and innovative infinite airflow system.
Plus PnP-VM6 0.15ohm coil and PnP-VM1 0.3ohm coil, the VOOPOO DRAG X kit will bring you the ultimate flavor.
In addition, the VOOPOO DRAG X device is compatible with all PnP coils.
Drag X Plus Kit is made by leather & metal and has 100W max output power with advanced GENE.FAN 2.0 chip.
It is of great battery compatibility and can work with single 18650 or 21700 battery.
It is one of the most portable mod devices. Drag X Plus Kit has a 0.96 inch TFT screen and dual UI themes (IRON and CORE).
In addition, it provides two modes to vape: SMART mode for newbies, RBA mode for DIY.
It comes with the new TPP Pod Tank designed with reference to "Aerodynamic Simulation" and a new "Two-way Convection" airway structure to offer a more powerful and flavorful vaping experience.
TPP Pod Tank is compatible with all TPP Coils and has 5.5ml e-juice capacity.
Magnetic design is applied to TPP Pod Tank as well. TPP series coils are designed with the technology that can increase the internal atomizer area and increase the heating speed to provide more delicate flavor.
TPP-DM1 0.15ohm Coil and TPP-DM2 0.2ohm Coil are included.
Drag X Plus Kit is also compatible with PnP Pod Tank and 510 platform.
Inheriting RIGEL's merits and excellent features while being slimmer and lighter, RIGEL Mini can burst with mighty power beyond your expectation.
Equipped with a TFV9 Mini tank and a powerhouse up to 80 watts powered by a single external 18650 battery, it will take your personal experience to the next level with an even greater leap on the performance and flavor delivery. The tank comes with a V9 Meshed coil and a V8 Baby Q2 coil aiming at making every puff satisfying and flavorful. Innovation keeps changing the vaping experience.
The absolute summer JUICE is here. Fresh homemade lemonade combined with caramel, mature mandarins, strawberries and cool mint create the must e-liquid for the summer or even for winter period.
INSTRUCTIONS:
The 120ml Mad Shake Bottle contains 20ml of concentrated perfume, which is enough to produce 100ml e-liquid.
1.Add the base of your choice. (VG, PG)
Suggested analogy is 70% VG / 30% PG
*On the packaging you will find a table of proportions
For 3mg nicotine you need: 15 ml of nicotine base and 65 ml of zero
For 6mg nicotine you need: 30ml of nicotine base and 50ml of zero
For 9mg nicotine you need: 45ml of nicotine base and 35ml of zero
For 12mg nicotine you need: 60ml of nicotine base and 20ml of zero
For 16mgnicotine you need: 80ml of nicotine base
2.Do not fill the bottle up to the top.
3.Shake well and let the contents mature.
Suggested steeping period 5 to 15 days.
*The above examples are calculated on a base of Mad Juice with 20mg / ml nicotine
** If you need more than 1 nicotine bottle it is recommended to shake well before adding the next
*** The original 20ml perfume contained is considered 100% PG from the manufacturer
**** This bottle is Chubby Gorilla 120ml and contains enough perfume (20ml) to make 100ml of e-liquid.
***** The box contains 1 Chubby Gorilla 120ml bottle with 20ml concentrated aroma and a second bottle with 65ml vegatable glycerine Mad Juice.
CAUTION: This product is not intended for immediate use. It is a concentrated fragrance and needs further treatment and dissolution.
With Icee Mint E-Liquid, you'll be immersed in a wave of ultimate freshness with this ice-cold mint mix and the Xtra Fresh effect from the Fruizee range.
The product is concentrated aroma 30ml in a 70ml bottle.
Add Nicotine Booster of your choice, then fill up the bottle with 0mg Base.
For 3mg nicotine add 10ml of 20mg/ml Booster.
For 6mg nicotine add 20ml of 20mg/ml Booster.
Manufactured in France in accordance with European Union standards.
Warning: The product can not be used directly, needs dilution with bases intended for use with electronic cigarette.
A tangy fruity blend of red fruits, grapes and yuzu with a sweet note brought by liquorice. An original E-liquid always with the Xtra Fresh effect of the Fruizee range.
The product is concentrated aroma 30ml in a 70ml bottle.
Add Nicotine Booster of your choice, then fill up the bottle with 0mg Base.
For 3mg nicotine add 10ml of 20mg/ml Booster.
For 6mg nicotine add 20ml of 20mg/ml Booster.
Manufactured in France in accordance with European Union standards.
Warning: The product can not be used directly, needs dilution with bases intended for use with electronic cigarette.
A tasty cocktail of fruity and sweet treats mixing strawberries, bananas and tangerines. A fruity but also fresh marriage with the Xtra Fresh effect of Fruizee.
The product is concentrated aroma 30ml in a 70ml bottle.
Add Nicotine Booster of your choice, then fill up the bottle with 0mg Base.
For 3mg nicotine add 10ml of 20mg/ml Booster.
For 6mg nicotine add 20ml of 20mg/ml Booster.
Manufactured in France in accordance with European Union standards.
Warning: The product can not be used directly, needs dilution with bases intended for use with electronic cigarette.
Let's go back years. During the summer, when we were young and playing in the neighborhood with the rest of the kids, how happy we were hearing the sound from the white canteen with ice creams!
As soon as we listened to this favorite music, we ran to the first row and enjoy our favorite strawberry ice cream .. so cool as sweet as if we were eating frozen jam ..
Get ready to feel the same feeling as the amazing strawberry ice cream!
Mad Juice Mad Shake are concentrated flavors 12ml and come in bottles of 60ml.
Instructions:
Add Mad Base Nicotine Booster
then fill up the bottle with 0mg Base.
For 0mgfill up the bottle with 0mg Base
For 3mg nicotine add 9ml of 20mg/ml Booster.
For 6mg nicotine add 18ml of 20mg/ml Booster.
For 9mg nicotine add 27ml of 20mg/ml Booster.
For 11mg nicotine add 36ml of 20mg/ml Booster.
For maximum steaming experience, steeping is recommended for a few days.
The Innokin Zlide Tube Tank is specially designed for INNOKIN Zlide Tube Pen Kit with 24mm diameter and 4ml e-juice large capacity.
The Zlide Tube adopts the Innokin's bestselling Z-Coils: 1.2ohm coil ranging from 10-14W and 0.8ohm coil ranging from 15-18W for long-lasting life and great flavor.
With the child safety locking system design, the Innokin Zlide Tube is easy to fill without leakage.
Plus the replaceable glass tank section and silicone seal, the Innokin Zlide Tube Atomizer is definitely an excellent vaping device.
The Innokin Gomax Tank is a Multi-Use Disposable Tank with big 5.5ml capacity that offers amazing flavors and upgraded mesh Plex3D matrix coils for purer flavor.
In addition, the Innokin Gomax Tank is a mesh tank and also a subohm tank because of its 0.19ohm mesh coil.
And the Gomax Tank comes with easy side top fill design and filled with silica gel to prevent leakage.
Plus the high quality PCTG Plastic, the Gomax Tank is very strong and durable.
Perfectly designed for cloud chasers, the SMOK TFV16 Lite Tank is definitely a super powerful and huge subohm tank with 5ml e-juice capacity and brand-new two TFV16 Lite mesh coils to bring massive vapor and superb flavor.
Moreover, the TFV16 Lite Tank adopts a sealed top refill system with a revolutionary top cap which comes with the secure locking mechanism to effectively avoid leakage problem.
Plus the upgraded airflow system, the SMOK TFV16 Lite Tank will bring your vaping experience to a new level.
Parameters TFV16 Lite Tank
Material: Stainless Steel
Size: 28 x 58.5mm
Weight: 73g
Capacity: 5ml
Coil: TFV16 Lite Conical Mesh Coil 0.2ohm(Best 60-85W), TFV16 Lite Dual Mesh Coil 0.15ohm(Best 60-90W)
Drip Tip: 16mm Resin Drip Tip
Thread: 810
It comes with
1 x SMOK TFV16 LiteTank (5ml)
1 x TFV16 Lite Conical Mesh Coil 0.2ohm Powered by nexMesh (Pre-installed)
Guroo Tank is a sub ohm tank that features easy top filling system. It has 4ml or 5ml (with the extra extension glass tube) e-juice capacity. With bottom adjustable airflow, it will provide you intense flavor and dense vapor. Adopting 0.3ohm/0.15ohm mesh coil, it can bring you great sub-ohm vaping experience.
Parameters:
Tank Capacity: 4ml/5ml (with the extra extension glass tube)
Airflow: Bottom adjustable airflow
Filling Type: Top filling
Tank Dimension Φ27*57mm (include the drip tip and coil)
It is designed for the Vaporesso Renova Zero Pod Kit with 2ml e-juice capacity, featuring the new innovative press to fill system which allows easy filling and improved leak prevention.
With the unique CCELL coil, it is optimized for high nicotine satisfaction.
Plus the high quality PCTG material, it is good and safe for the environment.
It features a convenient retractable top filling design, all-new 0.3ohm & 0.5ohm EC2 series coils with optimal flavor and dual adjustable bottom airflows for huge clouds.
Parameters
Size: 25mm x 52.5mm(D25)
E-liquid capacity: 4.5ml(D25)
Coil: EC2 0.3ohm Head (30-80W, pre-installed) EC2 0.5ohm Head (30-100W)
Discover the Lost Vape Centaurus DNA250C Box Mod, a successor to the popular Paranormal line, offering the legendary Evolv DNA250C Chipset, 1-200W wattage output range, and can utilize several advanced vaping modes that will make vaping much more enjoyable.
Constructed from premium materials and quality stainless steel, the CENTAURUS Mod work between the resistance range of 0.1-3.0ohms, allowing it to be paired with nearly any rebuildable or sub-ohm tank.
Accepting two high amp 18650 batteries (INCLUDED) through a bottom hinged battery door, the CENTAURUS Box Mod is capable of recharging via microUSB port, but can also function as a power bank to other devices with the included cable.
Offering several firing modes, the Lost Vape CENTAURUS can deliver smooth clouds of vapor through an advanced Curve mode, TC mode, and includes the super popular replay mode.
Discover the Lost Vape Centaurus DNA250C Box Mod, a successor to the popular Paranormal line, offering the legendary Evolv DNA250C Chipset, 1-200W wattage output range, and can utilize several advanced vaping modes that will make vaping much more enjoyable.
Constructed from premium materials and quality stainless steel, the CENTAURUS Mod work between the resistance range of 0.1-3.0ohms, allowing it to be paired with nearly any rebuildable or sub-ohm tank.
Accepting two high amp 18650 batteries (INCLUDED) through a bottom hinged battery door, the CENTAURUS Box Mod is capable of recharging via microUSB port, but can also function as a power bank to other devices with the included cable.
Offering several firing modes, the Lost Vape CENTAURUS can deliver smooth clouds of vapor through an advanced Curve mode, TC mode, and includes the super popular replay mode.
The Vaporesso GTX One VW Mod is powered by large 2000mAh inbuilt battery with portable size and 2A fast charging by Type-C cable.
Furthermore, featuring Max 40W adjustable power supporting smart VW mode, the Vaporesso GTX One VW Mod can offer impressive vaping experience throughout.
Plus the clear and concise 0.69'' OLED screen, you can quickly get the usage details.
The VOOPOO DRAG X Plus Mod is a new versatile vape mod.
Powered by single 18650 / 21700 battery (Sold Separately), the DRAG X Plus utilizes the advanced GENE.FAN 2.0 Chipset to reach up to 100W output with innovative Smart mode and RBA mode.
Constructed from superior zinc alloy, the DRAG X Plus features an exquisitely crafted chassis, blending together elements of leather and platinum colored metals for an exquisite form factor.
With a threaded 510 connection, the DRAG X Plus is compatible with TPP Pod Tank, PnP Pod Tank and your favorite 510 atomizers for an enjoyable vaping.
The dotBox 220W utilizes a robust chipset with all the features you've come to love, and is paired with a gorgeous new display.
This device allows you to enough the feature of your favorite full size box mod while keeping the smallest footprint imaginable for a dual 18650 device.
As the original dotBox 200W became a classic, we decided to keep the same feel and intentions of that device and put a modern spin on it with the dotBox 220W.
The 220W offers a sleek chassis made from anodized aluminum with a centrally located 510 connector that allows you to use any atomizer up to 25mm in diameter
The 220W boasts our proven bypass and curve mode, allowing you to dial in the perfect hit every time.
Now featuring two memory presets that allow you to save two of your favorite power mode/settings for quick and easy use, and USB-C for more robust charging capability.
Say hello to the Geekvape Aegis MAX 100W 21700 MOD which is currently the newest IP-67 rated device with military-grade architecture designed to be shockproof, waterproof and dustproof.
The Geekvape Aegis Max MOD is best for Geekvape Aegis Max kit and compatible with Zeus Sub-ohm Tank.
And the Geekvape Aegis Max MOD can use not only 21700 battery but also 18650 battery through 18650 battery adapter.
You can get adjustable wattage 5W to 100W and adjustable temperature 100°C-315°C/200°F-600°F.
In addition, the Geekvape Aegis Max MOD possesses display screen which can clearly show the usage details for you.
Just get the beautiful and portable Geekvape Aegis Max Box MOD and enjoy the amazing vaping.
Parameters
Output power: 5-100W
Input voltage: 3.2V-4.2V
Output voltage: 0.1-8V
Minimum voltage: 3.3V ± 0.1V
Longest output/vaping time: 10s
Charger voltage USB Micro: 5V1.5A
Battery: 21700/18650（single battery, not included)
The Aegis X 200W TC Box Mod from Geekvape is the whole new TC mod which is powered by dual 18650 batteries with innovative AS 2.0 chipset to strongly fire up 200W max output.
The several feasible modes including VW/TC/VPC modes will bring you the excitement of high speed and accurate operation.
Furthermore, it adopts 2.4 inch OLED display for easily checking out the fundamental conditions plus the the three-proof function including waterproof, dustproof and shockproof to ensure you a durable vaping.
The Vandy Vape JACKAROO 100W TC Box Mod continues the advancement of durable vape mods, deploying a single 21700/20700/18650 platform with IP67 waterproof and shock-resistance construction to create a near indestructible vape system.
The JACKAROO 100W Box Mod is crafted with a strong, rugged design combining beautiful wooden or resin panels while maintaining ergonomic form factor.
The internal chipset is powered by a single 21700 or 20700 battery with the optional use of single 18650 high-amp battery when using the included adapter (vape battery sold separately).
Features:
Dimensions - 90mm by 49.8mm by 33.2mm
Single 20700 / 21700 High-Amp Battery - Sold Separately Optional
Single 18650 High-Amp Battery - Adapter Sleeve Wattage
Output Range: 5-100W Voltage
Output Range: 0.5-8.0V
Max Output Current: 40A
Coil Resistance Range: 0.5-3.0ohm
Temperature Control Range: 200-600F
Power Mode Voltage Mode DIY Mode
Shockproof Material Chassis Construction IP67 Water Resistant
DOVPO Odin 100 Box Mod, the collaboration by Dovpo, Vaperz Cloud and youtube reviewer, Vaping Bogan, is a new portable member of Odin series.
DOVPO Odin 100 Mod, constructed of Aluminum Alloy & Zinc Alloy, is powered by single 18650/ 20700/ 21700 battery with max 100W output and charged by Type-C cable with 5V/1A charging system.
DOVPO Odin 100 features advanced Dovpo chip with VW, TCR, Bypass modes to meet vapers’ needs and 0.96 inch TFT color screen to show the detail vaping information.
Parameters:
Size: 36.3* 32* 90.5mm
Material: Aluminum Alloy & Zinc Alloy
Battery: single 18650/20700/21700 battery(not included)
The Rincoe JellyBox mod can fire out 228W max output by dual 18650 battery.
Features a transparent PC cover and zinc alloy frame, you can clearly see the internals and battery wraps.
And the Rincoe JellyBox Box Mod has 6 LED lights and shine through into the full device lighting it up! The screen Ul colour matches with the LED colour.
With the intelligent chipset, the Rincoe JellyBox Mod can bring you 1-228W adjustable wattage and 100-315°℃ adjustable temperature.
Rincoe Jellybox Mini Mod is a miniature version of Jellybox Mod, implementing a single battery layout and smart chipset within a transparent and durable chassis.
Jellybox Mini Mod is made of durable zinc alloy and a high-end PC.
The body size is more compact.
This contrast of transparent plastic and metal looks more visually aesthetic in this small device.
The control panel is located at the front.
The activation button is very large and raised. In addition, it is located on the handle which is conducive to ergonomics, which is convenient for daily holding and operation of the device.
Powered by a single 18650/20700/21700 vape battery (sold separately), this sleek mod boasts a VW / TC (Ni200 / Ti / SS) mode to meet different needs.
The implementation of the RINCOE chip within the Jellybox Mini Mod, offering wattages from 1 to 80W, a complete temperature control suite, and a slew of protections to keep the vape and user safe.
Jellybox Mini Mod uses 6 LED lights inside to light up the device.
The color of the lights can be changed by changing the UI settings.
To turn off the LED light, just press the fire button and the right button together in VW mode.
Parameter:
Size: 95* 44.3* 28mm
Material: Zinc alloy & PC
Battery: Single 21700/20700/18650 battery (Not included)
Output: 1-80W Modes: VW/ TC (Ni200/Ti/SS) PCB
Efficiency: 95%
Charging: 5V/2A
Output current: Max 30A
Output voltage: Max 4.2V
Input voltage: 3.0-4.2V
Thread: 510
Package Includes:
1* Jellybox Mini 80W Mod
1* Type C Charging Cabl
e 1* User Manual 1* Certificate Card 1* Warranty Card
RIGEL Mini can burst with mighty power beyond your expectation. It has a powerhouse up to 80 watts powered by a single external 18650 battery, it will take your personal experience to the next level with an even greater leap on the performance and flavor delivery.
The GeekVape Aegis Legend is a new durable and powerful Box MOD inheriting from the Aegis MOD family, its waterproof, shockproof and dust-proof design.
Powered by dual 18650 batteries (INCLUDED) with the new AS chipset, the Aegis Legend MOD releases up to 200W max output with a colored display screen which gives a fast, stable & powerful performance.
The Aegis Legend uses up to six different materials with high grade silicon, leather and alloy to achieve style and extreme durability.
Together with the advanced VW/TC modes, more convenient battery door and USB port for direct charging & firmware update, the GeekVape Aegis Legend 200W MOD is definitely an excellent vaping device!
Parameters
Size: 90.5x 58.5 x 30.6mm
MAX power output: 200W
Output mode: VW/ VPC/TC/TCR/BYPASS
Resistance range: 0.05-3.0ohm
Battery: 2x 18650 cell (not included)
Temperature Range: 100-315℃/200-600℉
Operating temperature: -40℃ - 80℃
Level: IP67 waterproof and dustproof; MIL STD 810G-516.6 military grade shockproof
Innokin Sensis is our newest vaporizer featuring an upgrade in technology which extends coil life and boost flavours for an unrivaled experience.
The Sensis 3.1ml glass pod is easy to fill with your favourite e-liquids. It's powered by Sceptre coils to give you incredible flavours.
Choose Sceptre 0.65Ω coils for tight-draw MTL vaping or the 0.25Ω coil, specifically designed for a higher wattage RDL experience.
Adjust the airflow to your preferred draw and enjoy great vaping! Upgrade to the Innokin Sensis for a unique flavour experience with the newest 4th generation technology in vaping.
Its 3000 mAh battery enables you vape longer and has fast and easy USB-C charging.
The Activate Coil+ mode can extend coil life and deliver more flavours to satisfy your taste buds.
The Refresh function resets the coil between hits to extend coil life.
The Quawins Vstick Pro Open Pod Kit is coming! The Quawins Vstick Pro Open Pod System improves the cartridge with innovative DS coil.
The Quawins Vstick Pro Open Pod System Kit comes with 99.99% leak-free and condensation free system and smart vibration reminder function.
Equipped with a powerful 400mAh integrated battery, 2ml refillable pod, the Quawins Vstick Pro offers various colors options.
What is more, the VSTICK Pro Pod possesses two ways which is with filter and without filter to enjoy the excellent vaping. With filter, you can obtain a vaping experience of 100% similar to a cigarette.
Without filter, you can share it with your friends by changing a filter.
It is worth saying that we provide the high-quality Tube Filter to you.
With extraordinaire and high-quality design, the Quawins VSTICK Pro Open Pod System is bound to satisfy the needs of customers who expect much of a vaping device.
The Trilogy RTA is a postless 30mm RTA that gives you the vape quality alike the Asgard RDA!
The deck brings four 2.5mm x 3.0mm individual post holes for easy coil installation with a massive airflow slot of 7.8mm x 6.4mm to capture all vapor in the reduced chamber.
HOWEVER – don’t be fooled by how it looks, the Trilogy RTA has a deceptive trick of creating negative pressure underneath the build deck, one that uses dual airflow diffusion and multi-chamber diffusion to create a negative pressure before the airflow ever hits the coils – giving a smooth silent vape that is only matched to an Asgard or Asgard mini RDA.
It truly gives unmatched flavor to any VC RTA previously, one that rivals most RDAs!
This is most certainly a MUST HAVE for anyone that is looking for great flavor and great vape quality without the hassle of dripping every so often.
The Asgard RDA is a top airflow 30mm RDA with a semi-postless design and massive 10mm juice well.
The deck brings four 2.5mm x 3.0mm individual post holes for easy coil installation with a quick release squonk pin which makes swapping from drip to squonk mode extremely fast and easy.
It’s unique airflow design is a key aspect to the vape experience it offers compared to other atomizers on the market.
On the outside, the RDA is sporting 48 airflow holes offering massive intake into the 2nd stage airflow chamber to build pressure before it is diffused onto the coil.
The air travels on a 30 degree angle through the ULTEM airflow diffuser – pushing under the coil grabbing all the flavor your coils can create before it travels through the reduced chamber and up into the drip tip.
(The flavor and vapor production is unmatched to any 30mm Vaperz Cloud atomizer we have done in the past.)
Offering innovation on every level and an incomparable vaping experience – this is a MUST BUY for all vaping and cloud chasing enthusiasts!
Parameters:
30mm with 33mm beauty ring
24k gold plated naval brass positive pin and post
Quick release squonk pin with spare screws set in deck
We have always been searching for the perfect atomizer to sit atop both our Squonk devices and Series devices – each one missing the mark with what we wanted in regards to branding, flavour, and airflow pull.
We worked long and hard on developing an atomizer that is versitile enough to be run on any device that both looks amazing and offers a flavorful vape unique only to bottom airflow atomizers!
If you are looking for an atomizer that is going to bring out those hidden flavour notes in your favourtie eliquid – look no further!
If you are looking for an atomizer that is going to give you tons of vapor production – look no further!
If you are looking for an atomizer that can show off your exotic coil builds and fit any wire you throw at it – look no further!
We are pleased to bring you the atomizer you have been looking for in the Nightmare RDA!
The Asgard mini RDA is exactly what the name says in being a smaller version of the Asgard RDA.
It is a top airflow 25mm RDA with a semi-postless design and 6ml juice well.
The deck brings four 2.5mm x 3.0mm individual post holes for easy coil installation with a quick release squonk pin which makes swapping from drip to squonk mode extremely fast and easy.
It’s unique airflow design is a key aspect to the vape experience it offers compared to other atomizers on the market.
On the outside, the RDA is sporting 48 airflow holes offering massive intake into the 2nd stage airflow chamber to build pressure before it is diffused onto the coil.
The air travels on a 30 degree angle through the ULTEM airflow diffuser – pushing under the coil grabbing all the flavor your coils can create before it travels through the reduced chamber and up into the drip tip.
If you are into squatty RDAs – this should be your choice!
Coming in at 25mm and being 23mm in height – this stubby cloud chasing RDA is a flavor banger!
Delivered with :
1x Asgard Mini RDA
1x Beauty ring
2x Drip tip 810
1x Set of replacement seals
1x Allen key
4x Spare post screw
1x BF closing screw
1x Carrying case
Thanks to its large tank, it can accommodate up to 6ml of liquid depending on the amount of cotton.
Bringing to you what could possibly be one of the best squonking 28mm rdas to the market, Vaperz cloud and suicide mods have come together and both have brought to the table there best creations to date.
Suicide Nightmare deck combined with a Valhalla top cap creates unbeatable flavor twinned with amazing airflow.
The Nightmare deck is a two post under coil airflow deck that features a 7mm deep juice well and a quick release squonk pin setup.
The Valhalla cap By Vaperz Cloud features and impressing 16 hole adjustable AFC, fine tune to suit all types of builds.
.jpg)
